PRODUCTS & SOLUTIONS
An air compressor is a device that converts power (using an electric motor, diesels or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air).An air compressor is essential for all factory and compressed air’s energy is more expensive than
other energy. So, we should choice air compressor to be right. We have been authorized distributors of KAESER, PUMA & JAGUAR compressors and have sold spare parts. Available in different horsepower from 1HP and above. We specialize in compressed air and can solve your compressed air problems, supporting you and your compressed air system. If you have some problem , you can join us anytime. We are welcome warmly to you.
Portable Air Compressor
A portable air compressor for sale from Compressed Air Systems can help you if you’re on the go and need to transport your compressor to multiple sites. Durability is even more important for portable compressors, as they have to endure the rigors of travel, and the high-quality portable air compressors for sale from us are built to withstand even the toughest auto shop, factory, and other industrial conditions
Rotary Screw Air Compressor
If you’re looking for a rotary screw air compressor for sale, then Compressed Air Systems is the perfect place to turn. Known for its simplicity, efficiency, and ability to run 24 hours a day without overheating, the rotary screw air compressor has gained in popularity for industrial uses.
Air Dryer
As a leading compressed air systems provider, KAESER understands that each component plays an integral role in efficient production of clean, quality compressed air. Therefore, all TAH-TCH series refrigeration dryers are manufactured in KAESER’s own dedicated production center in Gera, Germany, to ensure the very highest standards in system reliability and performance.
Line Filter
In order to ensure that the required grade of compressed air purity is consistently maintained, the filter elements should be replaced at the end of their service life. In addition, dependable condensate drainage is an essential part of reliable and environmentally-sound filtering out of aerosols. The automatic ECO-DRAIN 31 F condensate drain was especially designed for use with coalescence filters accumulating condensate is reliably removed without pressure loss.
Oil Free Air compressor
Offering a superior combination of low maintenance, low mess, and low noise, oil less air compressors are a popular choice for many businesses. Many type of food production and dental clinics use oil free air compressors because their productions are more sensitive and careful for their consumers.
KAESER
One of the most highly respected and renowned manufacturers in the world, KAESAR air compressors truly are the best of the best. They come from GERMANY and Compressed Air Systems is proud to be an authorized KAESER dealer and we offer many makes and models of KAESER compressor for sale.
Rotary screw compressors
Rotary screw compressors supply production processes in industry, trade and workshop applications with a reliable supply of quality compressed air. They are the preferred choice for users requiring constant pressure over prolonged periods.
To ensure that our rotary screw compressors operate as efficiently as possible, we developed our own special rotor profile. Our SIGMA profile rotors provide you with energy savings of up to 15 % compared with conventional rotor profile designs.
Furthermore, our air ends with SIGMA profile rotors boast an exceptionally long service life. This is in no small part due to the roller bearings we choose to use: they are precision adjusted and generously sized. Combine this with our in-house high-end manufacturing processes with lowest possible manufacturing tolerances and you have an exceptional product.
Rotary screw compressors with fluid cooling
Large selection – Low life-cycle costs
Fluid-injected rotary screw compressors are used in a wide range of sectors. They are highly durable and operate reliably and efficiently even at high temperatures of up to 45 °C. The associated investment costs are comparatively low.
However, the lion‘s share of life-cycle costs is spent on energy (up to 80 %). in fact, energy costs taken over the lifetime of a compressor, add up to a multiple of investment costs. For this reason, Kaeser rotary screw compressors are equipped with energy-saving SIGMA profile air end rotors that save up to 15 % energy compared to conventional rotor profile designs
Compressed air supply systems
Perfect efficiency with minimal space requirements
Our SXC and AIRCENTER air systems combine rotary screw compressor, refrigeration dryer and air receiver under a single enclosure. Due to their small footprint, these complete systems are the perfect solution for workshops and smaller industrial facilities.
Industrial quality dry-running reciprocating compressors: KCTD and KCT series
High-quality compressed air for industrial applications
The dry-running reciprocating compressors of the KCTD and KCT series are designed and constructed for demanding industrial applications. Kaeser offers a broad spectrum of products to companies with high compressed air quality standards; we draw on this extensive range to create customised compressed air stations to meet our customers' individual requirements.
We offer three design versions:
•Compact individual units consisting of a compressor and an air receiver (horizontal or vertical orientation)
•For fail-safe reliability: Dual units comprising two compressors and an air receiver
•For integration into individual or existing systems: Integrated base-mounted units
All versions are equipped with energy-efficient direct drive and cover the following performance spectrum:
•Pressure: 7/10 bar
Flow rate: 59 – 920 l/min
Oil-free reciprocating compressor compact units: AIRBOX and AIRBOX CENTER
Ready for connection, quiet-running and exceptionally durable
The AIRBOX and AIRBOX CENTER compact units with air receiver, dryer and optional filters are ready for connection and immediate operation. The integrated reciprocating compressor produces quality oil-free compressed air and is controlled by the SIGMA CONTROL BASIC or the SIGMA CONTROL 2 electronic controller.
The technical parameters for AIRBOX and AIRBOX CENTER units are as follows:
•Pressure: 7 / 10 / 12.5 bar
•Flow rate: 0.25 – 0.90 m³/min
•Motor power: 2.2 – 7.5 kW
The AIRBOX and AIRBOX CENTER oil-free reciprocating compressor compact units are perfect for applications requiring pure compressed air, such as in laboratories, in the pharmaceutical industry and in the beverage and food industry.
Boosters
Targeted use in high-pressure applications for greater efficiency
Do you require high pressure compressed air only at certain points in your production process? If so, the use of boosters is far more efficient than designing the entire system to deliver high pressure compressed air.
You can opt for either an individual component solution or an operation-ready complete system.
The DN C compact booster package – more than just a space-saver
Our unique and compact power house with a footprint of only 2.35 m²
This complete system has it all: Featuring a new design and a footprint approximately half the size of previous models, the DN C looks good both on the inside and outside. The new component layout not only ensures optimised cooling air flow, but also provides maintenance access.
Moreover, the updated SIGMA CONTROL 2 controller offers new, multiple monitoring and control options with a number of interfaces – including for connection to master controllers – with dynamic control.
Performance parameters:
•22 – 45 kW
•Initial pressure up to 13 bar – discharge pressure up to 45 bar
•Flow rate: 2.9 – 19.60 m³/min
Optional features:
The system is available as an air- or water-cooled version. Versions for nitrogen recovery, or a closed variant without external air (N2 version), are also available.
Applications:
PET bottle production, process air applications, nitrogen production, high pressure for test stations (e.g. brakes, coolers, etc.), test stations for pressure checks, burst pressure tests, and pulse tests.
High-performance reciprocating compressors N-series boosters
Your ticket to high-pressure performance
N-series boosters augment your existing system pressure in specific locations, elevating it up to 45 bar. Kaeser offers an extensive range of high-performance booster reciprocating compressors that work in perfect harmony with Kaeser rotary screw compressors and SIGMA PET AIR stations.
The N-series boosters are available with one, two or three cylinders and operate within the following performance parameters:
•Initial pressure up to 13 bar – discharge pressure up to 45 bar
•Flow rate: 0.27 – 20.51 m³/min
Compared to designing the entire compressed air supply system for higher pressure, the use of boosters is significantly more cost-effective for all applications that require process air with a higher degree of compression than the normal control air and supply air at specific locations. PET bottle production is an excellent example of such applications.
Complete booster system: SIGMA PET AIR
All-round carefree package for PET container production
The SIGMA PET AIR complete booster system combines blow and control air production in a single operation-ready system. An air-cooled rotary screw compressor produces the control air whilst simultaneously serving as a pre-compression stage for the blow air. Blow air booster, system controller and all compressed air treatment components for both pressure systems are installed operation-ready on a base frame.
SIGMA PET AIR delivers the following performance parameters:
•Flow rate up to 2772 m³/h
•Blow air up to 45 bar
The SIGMA PET AIR complete booster system is the perfect choice for operators of PET container blow-moulding equipment with high expectations when it comes to reliability, cost-effectiveness and compressed air quality.
Reciprocating compressors to meet OEM demands
Customised for every compressed air user
Do you have special compressed air supply requirements? Kaeser will put together a complete, turnkey compressed air station for you – with custom compressed air quality, flow rate and pressure requirement specifications.
•Flow rate 60 to 1400 l/min
•Pressure from 7 to 35 bar
Naturally we use only the highest quality, industrial-grade Kaeser components. In special circumstances, Kaeser can also construct a completely custom machine to meet your individual needs.
Blowers
Quiet powerhouses – from vacuum to low-pressure operation
Low-maintenance Kaeser blowers deliver pressurised air quietly and efficiently for a wide range of applications:
•for pneumatic conveying of bulk materials
•in water management – for example for aeration of sedimentation tanks and filter flushing
•for the production of blowing and cooling air for industrial purposes
•in mobile applications – e.g. mixing, tanker and suction vehicles
We provide two different concepts to meet your requirements:
•Rotary lobe blowers with our efficient, three-lobe OMEGA rotors to minimise pulsation effects
•Rotary screw blowers with the energy-saving SIGMA profile – designed by KAESER for optimal pressure and output
COMPACT rotary lobe blowers up to 200 kW
Smart design, compact and ready for immediate use
Our COMPACT blowers are optionally available as a complete package with integrated electrical equipment. This ensures easy commissioning and maintenance as well as reliable and economical operation:
•Space-saving blowers – complete with sound enclosure. Modular concept permits easy expansion (models BB C to FB C and HB 950 C)
•Also suitable for nitrogen conveying applications (CN versions)
•OFC and STC models as complete plug-and-play systems with integrated electrical controls and power supply: optionally available with a star-delta starter or variable speed control (STC and OFC versions)
Rotary lobe blowers – Large packages up to 250 kW
True powerhouses with low maintenance requirement
With their uniform design concept, our large blower units can be individually configured and expanded to meet your needs. They are easy to maintain and operate, and are also available upon request for outdoor installation.
•High-performance, energy-saving and low-maintenance blower packages with three-lobe blower blocks (models HB 1300 PI and 1600 PI)
•Also available for nitrogen conveying applications (N versions)
