KAESER | Delight

© 2019 by Delight Co.,Ltd Proudly created with

  • Facebook - Grey Circle

PRODUCTS & SOLUTIONS

An air compressor is a device that converts power (using an electric motor, diesels or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air).An air compressor is essential for all factory and compressed air’s energy is more expensive than

other energy. So, we should choice air compressor to be right. We have been authorized distributors of KAESER, PUMA & JAGUAR compressors and have sold spare parts. Available in different horsepower from 1HP and above. We specialize in compressed air  and  can solve your compressed air problems,  supporting you and your compressed air system. If you have some problem , you can join us anytime. We are welcome warmly to you.

Portable Air Compressor

A portable air compressor for sale from Compressed Air Systems can help you if you’re on the go and need to transport your compressor to multiple sites. Durability is even more important for portable compressors, as they have to endure the rigors of travel, and the high-quality portable air compressors for sale from us are built to withstand even the toughest auto shop, factory, and other industrial conditions

Rotary Screw Air Compressor

If you’re looking for a rotary screw air compressor for sale, then Compressed Air Systems is the perfect place to turn. Known for its simplicity, efficiency, and ability to run 24 hours a day without overheating, the rotary screw air compressor has gained in popularity for industrial uses. 

Air Dryer

As a leading compressed air systems provider, KAESER understands that each component plays an integral role in efficient production of clean, quality compressed air. Therefore, all TAH-TCH series refrigeration dryers are manufactured in KAESER’s own dedicated production center in Gera, Germany, to ensure the very highest standards in system reliability and performance.

Line Filter

In order to ensure that the required grade of compressed air purity is consistently maintained, the filter elements should be replaced at the end of their service life. In addition, dependable condensate drainage is an essential part of reliable and environmentally-sound filtering out of aerosols. The automatic ECO-DRAIN 31 F condensate drain was especially designed for use with coalescence filters accumulating condensate is reliably removed without pressure loss.

Oil Free Air compressor

Offering a superior combination of low maintenance, low mess, and low noise, oil less air compressors are a popular choice for many businesses. Many type of food production and dental clinics use oil free air compressors because their productions are more sensitive and careful for their consumers.

KAESER

One of the most highly respected and renowned manufacturers in the world, KAESAR air compressors truly are the best of the best. They come from GERMANY and Compressed Air Systems is proud to be an authorized KAESER dealer and we offer many makes and models of KAESER compressor for sale.

Rotary screw compressors

Rotary screw compressors supply production processes in industry, trade and workshop applications with a reliable supply of quality compressed air. They are the preferred choice for users requiring constant pressure over prolonged periods.
To ensure that our rotary screw compressors operate as efficiently as possible, we developed our own special rotor profile. Our SIGMA profile rotors provide you with energy savings of up to 15 % compared with conventional rotor profile designs.
Furthermore, our air ends with SIGMA profile rotors boast an exceptionally long service life. This is in no small part due to the roller bearings we choose to use: they are precision adjusted and generously sized. Combine this with our in-house high-end manufacturing processes with lowest possible manufacturing tolerances and you have an exceptional product.

Rotary screw compressors with fluid cooling

Large selection – Low life-cycle costs

Fluid-injected rotary screw compressors are used in a wide range of sectors. They are highly durable and operate reliably and efficiently even at high temperatures of up to 45 °C. The associated investment costs are comparatively low.
However, the lion‘s share of life-cycle costs is spent on energy (up to 80 %). in fact, energy costs taken over the lifetime of a compressor, add up to a multiple of investment costs. For this reason, Kaeser rotary screw compressors are equipped with energy-saving SIGMA profile air end rotors that save up to 15 % energy compared to conventional rotor profile designs

Compressed air supply systems

Perfect efficiency with minimal space requirements

Our SXC and AIRCENTER air systems combine rotary screw compressor, refrigeration dryer and air receiver under a single enclosure. Due to their small footprint, these complete systems are the perfect solution for workshops and smaller industrial facilities.

Compressed Air System Basic Models: The SXC "Compact" Series

The all-in-one compact compressed air package

Compressed air systems of the SXC series have been designed for trades and crafts. On only 0.62 m², they comprise all components necessary for air supply under a single strong polyethylene cover: a rotary screw compressor with SIGMA-Profile, a refrigeration dryer and an air receiver.

Compressed air systems of the SXC series are offered with these performance data:

•Pressure: 8, 11 or 15 bar

•Flow rate range: 0.26 – 0.80 m³/min

Premium Compressed Air Stations: AIRCENTER

Quality doesn't need a lot of space

AIRCENTER stations by Kaeser provide their owners with complete solutions in premium quality. The rotary screw compressor with SIGMA profile, add-on refrigeration dryer and compressed air receiver ensure a straightforward compressed air supply for your facility. The SX, SM and SK series AIRCENTER feature these technical parameters:

•Pressure: 8, 11 or 15 bar

•Flow rate range: 0.26 – 2.55 m³/min

Our premium compressed air stations require little space and are the perfect solution for smaller industrial operations.

Rotary screw compressors with belt drive

Compact design with impressive performance

Kaeser rotary screw compressors with V-belt drive provide outstanding efficiency and reliability. They feature the energy-saving SIGMA profile rotor and a SIGMA CONTROL 2 controller. You can choose from four series with these technical parameters:

•Pressure: 8, 11 or 15 bar

•Flow rate: 0.26 – 4.65 m³/min

All series are available as standard models but also with

•Add-on refrigeration dryer for high compressed air quality and/or

•Speed-controlled motor for a large flow rate control range. (SM, SK and ASK series)

We will gladly tell you which model is the perfect solution for you.

Rotary screw compressors with 1:1 direct drive

Compact design with impressive performance

Kaeser rotary screw compressors with V-belt drive provide outstanding efficiency and reliability. They feature the energy-saving SIGMA profile rotor and a SIGMA CONTROL 2 controller. You can choose from four series with these technical parameters:

•Pressure: 8, 11 or 15 bar

•Flow rate: 0.26 – 4.65 m³/min

All series are available as standard models but also with

•Add-on refrigeration dryer for high compressed air quality and/or

•Speed-controlled motor for a large flow rate control range. (SM, SK and ASK series)

We will gladly tell you which model is the perfect solution for you.

Fluid-injected rotary screw compressors with dual compressors: the HSD series

More volume flow on less space

For our HSD series, we integrated two compressors in a single enclosure. Both units are fully equipped with 1:1 direct drive, SIGMA CONTROL controller and cooling system. This series offers these technical data:

•Pressure: 8.5, 12 or 15 bar

•Flow rate: 10.1 – 89 m³/min

You can order HSD systems with or without speed-controlled drive. Due to the high flow rates, they are very well suited for demand-intensive applications in the automotive sector or steel industry.

Marine compressors

Full pressure ahead

Even on the high seas, our comprehensive range of rotary screw compressors and rotary screw blowers meet all of your compressed air requirements.
Matched to your specific circumstances, we have the right solution for every application on every ship. 

Our extensive product range covers the needs of almost any application. No matter whether for bulk material transport, nitrogen supply or wastewater treatment, with KAESER you always have a dependable partner at your side. 

KAESER marine products are certified by all of the marine classification societies and are valued as much for their reliability as their energy efficiency and long service life.

You can choose between the following product types:

•Rotary screw compressors with constant pressure up to 14 bar and flow rates up to 5100 m³/h

•Rotary screw blowers with a differential pressure up to 1.1 bar and flow rates up to 9600 m³/h

Compressors for oil-free compressed air

Robust and clean-running for sensitive processes

Whether for the semiconductor, food or automotive industries: our two-stage, oil-free compression rotary screw compressors tirelessly prove that process-sure purity and efficiency do indeed go hand in hand – even in extreme conditions.

•Uncompromising efficiency – Efficient compression with "Ultracoat"

•Service-friendly design – Maximum machine availability, minimal inspection time

Oil-free compression rotary screw compressor with air-cooling

Reliably robust – even under extreme conditions

In the absence of cooling-water infrastructure, air-cooled oil-free compression rotary screw compressors ensure exceptional compressed air supply reliability – even in ambient temperatures as high as 45 °C.
There’s also plenty of power: thanks to innovative and intelligent system design, air-cooled oil-free compression rotary screw compressors are available up to 355 kW.

•Flow rates from 3.2 to 50.8 m³/min

•Robust stainless steel-aluminium cooler combination

•Also available as a peak-load model with variable-speed control and frequency converter (SFC model versions)

•Also available with integrated i.HOC rotary dryer (CSG-2 & DSG-2 series)

Oil-free compression rotary screw compressors with water-cooling

Compact energy-savers

Durable yet refined drive and cooling solutions enable us to achieve lowest possible power consumption values.
This, in combination with a Kaeser heat recovery system, also allows you to significantly reduce your heating costs. We'd be glad to help you with a solution that meets your exact needs.
Thanks to their compact design and type-dependant small exhaust air duct, our water-cooled oil-free compression rotary screw compressors earn extra points when it comes to installation in low-ceiling areas.

•Flow rates from 3.3 to 50.8 m³/min

•Also available as a peak-load model with variable-speed control and frequency converter (SFC model versions)

•Also available with integrated i.HOC rotation dryer (DSG-2 series)

Oil-free compression rotary screw compressors with integrated compressed air dryer

i.HOC – Outstandingly efficient compressed air drying

The patented i.HOC rotary dryer from Kaeser uses up to 100 % of compressor heat! Thanks to full-flow regeneration, it delivers reliable pressure dew points up to an ambient temperature of 45 °C – completely without electrical heating or additional cooling of the regeneration air!

•Installed in air-cooled or water-cooled units

•Unit rated power from 37 kW to 200 kW

•Unit flow rates from 3.3 m³/min to 30 m³/min

•Integrated SIGMA CONTROL 2 compressor controller (SFC model versions)

Delight